Most electrical problems in a home get a first look from the person who lives there. A tripped breaker gets reset. A dead outlet gets tested with a lamp from another room. A flickering light gets a new bulb. That first pass makes sense, and it catches the obvious things. The point at which it stops making sense is when the symptom comes back, or when there is no clear reason it happened in the first place. That is when a call saves more time than another reset.
Meridian is a large city with a housing stock that runs the full range, from newer subdivisions with modern panels to older homes where the wiring reflects a different era and a much lighter load. Rental properties, commercial spaces, and single-family homes each generate their own pattern of electrical calls, and we handle all of them.
Call (208) 795-9878 and describe what you are seeing. We take it from there.
Not every power problem originates inside the home. A utility fault, a damaged service entrance, or a failed transformer upstream can produce symptoms that look exactly like a wiring issue inside the walls. Before any interior work is diagnosed or priced, the first step is figuring out which side of the meter the problem sits on.
We check the service entrance, the meter base, and the main panel to establish where the fault begins. If the problem is upstream of the meter, the utility company owns the repair. We tell you that clearly, describe what you are looking at, and let you know what to report when you call them.
If the fault is on the utility side, the visit is not wasted. You have a clear picture of your panel and service entrance, and you know what to tell the utility when you call. If the service entrance itself is the issue, that sits on the homeowner's side of the line and is work we handle directly. A damaged or undersized service entrance is worth addressing on its own terms regardless of what triggered the inspection.
Some calls are easy to scope because the fault is sitting there when we arrive. Others are not. A breaker that trips only when the washing machine runs a full cycle, a circuit that loses power in wet weather, an outlet that works fine for a week and then goes dead again: these are the calls where the symptom has already disappeared by the time anyone looks at it.
Finding an intermittent fault is its own kind of work. It means tracing the circuit under load, checking connections that look fine at rest but fail under heat or vibration, and testing for conditions that do not show up in a static check. Loose connections inside a junction box, a failing device that passes a basic test, aluminum branch-circuit wiring that has oxidized at a connection point: all of these can produce a fault that comes and goes. The diagnostic visit is not a quick look. It is a methodical trace, and we do not stop at the first thing that looks plausible.
We'll trace it, fix it, and test it before we leave.
A home that still carries knob-and-tube wiring or aluminum branch-circuit wiring is not automatically an emergency, but it is a situation that warrants a clear-eyed look. Knob-and-tube replacement and aluminum wiring remediation are jobs we handle regularly in this region, where a significant portion of the housing stock was built before current wiring standards existed. Partial rewiring addresses specific circuits or rooms. Whole-home rewiring is the right call when the wiring has reached the point where targeted repairs no longer make sense.
A ceiling fan installation is straightforward when there is already a switched outlet box rated for a fan. When there is not, the job involves running a new circuit or modifying the existing switch leg, and the scope changes accordingly. We confirm what the box and the wiring can support before any fan goes up.
This is the work described in the section above, and it belongs here because it is a distinct job type rather than a step inside another repair. A dedicated diagnostic visit, with load testing and circuit tracing, is sometimes the only way to find a fault that does not perform on demand. GFCI and AFCI protection devices are checked as part of this process, because a nuisance trip from a failing arc-fault breaker can look identical to a real wiring fault.
Grounding and bonding are the parts of a wiring system that most people never think about until something goes wrong. An ungrounded outlet reads as functional on a basic test and fails when it matters. Bonding gaps in a panel or at a subpanel can allow voltage differences to develop between metal surfaces that should be at the same potential. We check both during outlet replacement, panel work, and safety inspections, and we correct deficiencies as a standalone job when that is what the inspection turns up.
Low-voltage work covers the wiring side of doorbell systems, data drops, and structured wiring rough-ins. In a city the size of Meridian, this comes up regularly in home office builds, rental property turnover, and commercial tenant improvements. We handle the rough-in and the circuit feeding it. The equipment itself is the customer's call.
Local coverage. Safe wiring. Costs explained before we start. If you are working out what the job needs, the services page goes through it.
An outlet that has never worked, a switch that sparks when you flip it, and an exterior light that has been on the to-do list for two years are all easy to put off. None of them is an emergency, and there is always something more pressing. The problem is that small faults do not stay small indefinitely.
A switch that sparks is usually a worn device that needs replacing. Left long enough, a worn device becomes a connection that runs hot. A dead outlet that nobody uses is easy to ignore until it turns out to be the reason a GFCI device upstream has been tripping and resetting without anyone noticing. We service this area, and its neighborhoods each have their own wiring. What looks like a minor nuisance in one home can point to something that matters in another, and the only way to know is to look.
The jobs people put off are also the easiest to schedule, because they are not urgent. A call that is not driven by a crisis is a call where the timing is flexible and the scope is clear before anyone arrives. Panel and wiring work finished to code is the standard regardless of how small the job looks on the surface.
Not every electrical fault gives you the option of waiting for a convenient slot. A circuit that goes out in a rental unit, a panel fault that takes down part of a commercial space, or a wiring problem that cannot be left unaddressed: these calls need a faster response than a standard booking allows. We take short-notice work when the schedule allows, and the way to find out what is available is to call and ask. We are available every day from 8:00 AM to 9:30 PM.
A tenant who cannot be displaced and a business that has to stay open are constraints we work around rather than problems that push a job back. The scope and the timing are discussed on the call so the visit is planned around what the property actually needs. Dead outlets usually have a simple cause worth finding, and finding it does not require shutting down the whole circuit if the work can be staged correctly.
A quote covers the job as it is scoped on the call. What moves it is what the job actually turns out to involve once the diagnostic work is done. The fault's location, what has to be opened up to reach it, and whether the existing panel or circuit can carry the change without additional work are the three things that most commonly shift a price from the initial estimate.
A panel upgrade that also requires service-entrance work is a different scope from one where the entrance is already in good condition. A circuit addition that requires a load calculation to confirm available capacity is a different job from one where the panel has headroom to spare. Subpanel installation for a detached garage or outbuilding, backup generator hookups, and EV charger circuits all follow the same logic: the price reflects what the job actually involves, and that is confirmed before anything is scheduled.
Call (208) 795-9878 and describe the situation.
We go through the scope on the call, give you a price, and explain what it covers. The price is confirmed before the visit is booked. A figure before anything starts. Flexible timing. Safe wiring.
We cover Meridian and the surrounding Ada County area, and that coverage extends to Kuna, Eagle, Garden City, Star, and Nampa. Residential and commercial work both fall within the area we schedule, from single-family homes and rental properties to commercial buildings and tenant build-outs. If your address is in or near any of these communities, call and we will confirm what is available.
In most cases, yes. If the work only affects the circuits being worked on, other circuits stay live and the refrigerator or freezer continues running. Where the panel needs to go off entirely for part of the visit, we plan that portion to be as brief as possible and will tell you in advance so you can prepare.
Describing what you see in the panel when you call is genuinely helpful. You can note the panel brand, whether breakers are labeled, whether any breakers are visibly tripped, and how much space is left for new breakers. That information helps us scope the job more accurately on the phone before anyone is dispatched.
A burning smell near an outlet or switch is a sign that something in the wiring or device is overheating, and it warrants a call right away rather than a wait-and-see approach.
Turn off the circuit at the breaker if you can do so safely, and call (208) 795-9878 to describe what you are noticing. That kind of symptom does not improve on its own.
Meridian's housing stock spans a wide range of ages and wiring types, which means the calls we see cover everything from GFCI outlet replacement and ceiling fan installation in newer homes to knob-and-tube replacement and aluminum wiring remediation in older ones. Panel upgrades are common too, particularly in homes where the original service was never sized for the loads a modern household puts on it. The pattern of what comes up most often is shaped by the age of the home and what has or has not been updated over the years.
A partial outage, where one room or one side of the house goes dark while the rest runs fine, often points to a tripped breaker, a failed GFCI outlet upstream, or a problem at the service entrance. We trace the fault back to its source during the visit rather than assuming the breaker is the whole story.
Yes. The hookup covers the transfer switch installation, the wiring from the generator connection point to the panel, and the identification of which circuits will carry the backed-up load during an outage. The transfer switch is what keeps generator power from back-feeding into the utility lines, and it is a code requirement rather than an optional addition. We handle the electrical side of the connection for both portable and standby generator setups throughout the Meridian area and the surrounding Ada County communities.
We answer the phone, we show up, and we explain what we found before anything is touched. That is the whole process.
If you have an electrical problem in Meridian, whether it is a fault you can describe or something you cannot quite put into words, call (208) 795-9878.
We are available every day from 8:00 AM to 9:30 PM. We'll make your wiring safe again.
Also serving: Kuna, Eagle, Garden City.
The calls we get from Meridian and Ada County cover the full range of residential and commercial electrical work, from a single tripped breaker to a complete panel replacement. The table below lays out what each service covers, who it fits best, and a practical note worth knowing before you call. Every job gets a price on the phone before anything is scheduled, and the scope is confirmed before work begins.
Call (208) 795-9878 to talk through what you are seeing.
| Service | What's Included | Common Situations | Good to Know |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgradesLoad calculation and panel sizingMeter base and service entrance workSubpanel installation for outbuildings | Older homes adding large loads, EV chargers, or electric heating equipment | A load calculation confirms what the panel is actually carrying before any upgrade work is scoped, so the new panel is sized for current and future demand. |
| Dedicated Appliance Circuits | 240-volt outlet installationCircuits for dryers, ranges, and dishwashersRefrigerator and microwave circuitsWorkshop and garage circuits | Homes adding a large appliance or experiencing repeated trips on a shared circuit | Running a large appliance on a shared circuit is the most common cause of nuisance tripping. A dedicated circuit resolves it at the source. |
| Heat Tape Installation | Dedicated circuit to exterior or crawl spaceGFCI-protected outlet installationSoffit and unheated utility area wiringPipe and roof-edge circuit runs | Meridian homes with exposed pipes or roof edges vulnerable to freezing during Ada County winters | Heat tape draws a consistent load and needs its own dedicated circuit with GFCI protection. Running that circuit safely is the part of the job that requires an electrician. |
Call (208) 795-9878 to describe what you are seeing, get a price on the call, and find out what the job involves before anything is scheduled.
(208) 795-9878