Wiring problems rarely announce themselves clearly. A breaker that trips without explanation, an outlet that stopped working in one room, lights that flicker when the furnace kicks on: these are the signs that something in the electrical system needs attention, and waiting to see if they resolve on their own is not the right answer. We handle residential and commercial electrical work throughout Ontario and the surrounding area, from straightforward repairs to full panel replacements and everything in between. Every job gets treated like it matters, because it does.
Ontario is a small city with a housing stock that reflects its age and its agricultural roots. Older homes on original wiring, outbuildings that were added long after the main house was built, and panels that were never sized for the loads a modern household puts on them are common here. Businesses and rental properties carry their own set of demands. Whatever the job is, the process starts the same way: describe what you are seeing, get a price on the phone, and schedule when it works for you.
Call (208) 795-9878 to get started.
Some electrical problems are obvious. Others are not. A panel that has never been updated, outlets that are ungrounded, knob-and-tube wiring still running through the walls of an older home: none of these trips a breaker or blows a fuse. They just sit there, carrying risk that is not visible until something goes wrong. We handle the kind of diagnostic work that turns up those problems before they become emergencies.
GFCI and AFCI protection are part of that picture. GFCI outlets in kitchens, bathrooms, garages, and exterior locations protect against shock in wet areas. AFCI breakers detect arc faults inside walls, the kind of fault that can cause a fire without ever tripping a standard breaker. Both are worth checking in any home that has not had its wiring reviewed in some time. Aluminum branch-circuit wiring and knob-and-tube systems require a different approach, and we handle remediation for both.
Lighting questions come in two directions. Inside the home, the most common requests are recessed lighting installation, LED fixture swaps, and under-cabinet lighting in kitchens. Recessed cans change what a room looks like and what it costs to run. An LED retrofit on an older fixture does the same thing without opening the ceiling. Neither is a complicated job on its own, but both are worth doing alongside other electrical work when walls or ceilings are already accessible.
Outside, security lighting and motion-sensor fixtures are the practical choice for driveways, outbuildings, and side entries. Exterior lighting circuits need proper weatherproofing and GFCI protection at the outlet, and the wiring has to be run correctly whether it is going to a porch light or a fixture mounted on a detached garage. If the garage does not yet have a subpanel feed, that is a conversation worth having at the same time.
We are available every day from 8:00 AM to 9:30 PM. That window covers most of what homeowners and property managers in Ontario need, and short-notice calls are handled when the schedule allows. When you call, you describe the situation and we confirm what is available. The scope and the price are settled before anything is booked, so the visit is productive from the moment it starts.
Businesses and rental properties with tenants in place need a different kind of coordination. A commercial space that has to stay operational during an electrical job, or a rental unit where a tenant is present, requires the work to be sequenced so disruptions are brief and predictable. We work through that on the call: what needs to go off, for how long, and when. Nothing is left open-ended.
In a multi-unit building, the panel for an individual unit is not always where you would expect it. It may be in a utility closet, a hallway, or a shared mechanical room. The circuits feeding that unit are usually separate from the building's common-area service, but the main service entrance and the meter bank belong to the property owner or the building's electrical system, not to the unit itself.
When a fault or a capacity question touches the shared side of the building's electrical system, the building owner or property manager is the right contact for the work that sits outside the unit. We handle the circuits and panel within the unit, and we can scope what is needed clearly enough that the property manager knows what to bring to their own electrician for the shared portions. Getting that picture right from the start saves time on both ends. Before booking anything, our page of electrical services is worth a read.
Not every electrical fault belongs to the homeowner's wiring. The utility owns the service entrance up to the meter, and problems on that side, a failed transformer, a loose connection at the weatherhead, or a damaged service drop, are theirs to repair. What we do is work through the diagnostic from the panel back toward the source. If the fault traces to the service entrance or beyond the meter, we tell you what we found and what the next call is.
On the homeowner's side of the meter, the service entrance conductors, the main breaker, and everything downstream belong to the property. A loose connection at the service entrance can cause voltage fluctuations that look like a panel problem from inside the house. Getting that distinction right is part of the diagnostic, not an afterthought. We'll trace it, fix it, and test it before we leave.
An older panel that is running near its limits, a breaker that will not hold, or a service that was never sized for the loads the property now carries: these are the situations that lead to a panel replacement or service upgrade. A load calculation tells us what the panel is actually carrying versus what it was built to handle. From there, the options are clear, whether that means a single breaker, a full panel swap, or a 200-amp service upgrade that brings capacity in line with current demand.
A detached garage or outbuilding with no electrical supply is a common situation in Ontario, where properties often include secondary structures that were built before a power connection was practical. Running a feed to a detached structure means a dedicated circuit or a subpanel, depending on the loads it needs to carry. Electric gate operators and outbuilding circuits fall into the same category: a load with specific requirements that needs its own properly sized run.
Battery-operated detectors are better than nothing, but hardwired smoke and carbon monoxide alarms with battery backup are the right answer for a home that takes safety seriously. Hardwired units communicate with each other, so a detection in one room triggers every alarm in the house. Installing them correctly means running the interconnect wiring and tying into a circuit that will not be switched off accidentally.
In a region where multi-day winter outages are a real possibility, a generator without the right electrical connection is just a loud machine in the driveway. A transfer switch at the panel is what makes a generator safe and legal to use: it isolates the home from the utility line before generator power is connected, so the output cannot back-feed into the grid. We handle the transfer switch installation, the wiring, and the panel integration. The generator itself is the homeowner's choice.
A welder, an air compressor, or a large piece of shop equipment draws a load that a standard 15- or 20-amp circuit cannot handle. Dedicated circuits for workshop equipment are sized to the nameplate requirements of the tool, run on their own breaker, and wired with the right gauge for the load. Getting that sizing right the first time means the circuit does not trip under normal use and the wiring does not run hotter than it should. EV charger circuits follow the same logic: a 240-volt dedicated run sized to the charger's requirements, with a panel capacity check before the circuit is run.
The price on any electrical job depends on what the job actually involves. A panel upgrade in a home with a straightforward service entrance is a different scope from one where the meter base also needs updating. A fault repair that traces quickly to a single loose connection is a different visit from one where the problem turns out to be inside the wall. What has to be opened up to reach the fault, whether the existing circuit or panel can carry the change, and what the wiring behind the walls turns out to be: these are the things that move a quote.
You call, describe what you are seeing, and we go through the scope on the phone. The price is confirmed before anything is scheduled, and what it covers is explained at the same time. There are no adjustments after the fact for work that was always part of the scope. A figure before anything starts. Flexible timing. Safe wiring.
Ontario is the center of the area we serve. We also take calls from Nyssa, Vale, Fruitland, Payette, New Plymouth, and the surrounding communities throughout Malheur County. Residential and commercial work both fall within the service area, from single-family homes and rental properties to agricultural operations and commercial buildings across the region.
We are available every day from 8:00 AM to 9:30 PM, including weekends. That covers most of the scheduling windows that homeowners and property managers in Ontario actually need.
Call (208) 795-9878 and we will tell you what is open.
If we have traced or added circuits during the visit, we label them at the panel before we leave. A panel with an accurate directory is more useful than one that was left unlabeled, and it makes any future work on that panel faster and safer.
We are available every day from 8:00 AM to 9:30 PM, which covers a range of scheduling windows beyond standard business hours. When you call, we will find a time that works given the access situation at the property.
We check the service entrance and the panel first to determine whether the fault is on the customer's side of the meter. If the issue is on the utility's side, we will tell you that clearly and explain what to report to the utility company. You will not be charged for work that turns out to be outside your property.
Older homes in this area frequently have panels that were never sized for modern loads, ungrounded outlets, and in some cases knob-and-tube or aluminum branch-circuit wiring that has not been updated. None of these is automatically an emergency, but each one is worth a proper look. A diagnostic visit is the right starting point when a home's electrical history is unclear.
If the diagnostic points to a problem on the utility's side of the meter, we will tell you that clearly and explain what to report to the utility. We do not do work on utility-owned equipment, but we will make sure you understand what the problem is and who is responsible for fixing it before we leave.
Yes. Workshop equipment circuits are sized to the nameplate requirements of the tool and run on their own breaker. If the outbuilding does not yet have a subpanel feed, that is part of the same conversation. Call and describe the equipment you are running and we will scope the circuit requirements on the call.
Describing what you are seeing is enough.
A breaker that keeps tripping, a fixture that stopped working, a panel that needs more room: call (208) 795-9878 and we will work through the scope with you.
We are available every day from 8:00 AM to 9:30 PM. We'll make your wiring safe again.
The calls we get from Ontario and Malheur County cover the full range of residential and commercial electrical work, from a single tripped breaker to a complete panel replacement. The table below lays out what each service covers, who it fits best, and a practical note worth knowing before you call. Every job gets a price on the phone before anything is scheduled, and the scope is confirmed before work begins.
Call (208) 795-9878 to talk through what you are seeing.
| Service | What's Included | Common Situations | Good to Know |
|---|---|---|---|
| Lighting Installation | Recessed and LED fixture installationExterior and driveway lightingUnder-cabinet lightingPorch and outbuilding lighting circuits | Remodels, new construction, and exterior security lighting | Exterior lighting in Malheur County benefits from weatherproof fixtures and circuits run to code for outdoor locations. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgradesLoad calculation and panel sizingMeter base and service entrance workSubpanel installation for outbuildings | Older homes adding large loads, EV chargers, or electric heating equipment | A load calculation confirms what the panel is actually carrying before any upgrade work is scoped, so the new panel is sized for current and future demand. |
| Outlet & Switch Installation | Standard and GFCI outlet replacementAFCI protection on bedroom circuitsDimmer and smart switch wiringOutdoor and garage outlet installation | Homeowners adding outlets, upgrading protection, or replacing failed devices | GFCI outlets in kitchens, bathrooms, garages, and outdoor locations are a code requirement, and placement in the circuit matters for proper protection. |
Call (208) 795-9878 to describe what you are seeing, get a price on the call, and find out what the job involves before anything is scheduled.
(208) 795-9878